DRPR001 Stainless Steel Proximity Request-to-Exit Switch

  • Click to enlarge
DRPR001 Stainless Steel Proximity Request-to-Exit Switch

Tap to enlarge


Product Information


The DRPR001, RTE (Request to Exit) proximity switches are intended as non-contact door egress switches. They use high reliability solid state infra-red technology. By placing a reflective surface (a hand or finger for example) within approximately 50mm of the sensor, the unit will operate a relay changeover contact that can be used to actuate a door lock. The unit’s sensor emits a specifically pulsed infra-red signal and will only operate when it sees its own signal reflected back; so is not susceptible to false triggering, for example from fluorescent lighting. Mounting is via standard single gang flush back-box. The RTE is ideal for use in ‘clean’ rooms and laboratories where minimum contact with objects is required to reduce the risk of cross contamination or any application requiring non contact egress.
Switch Type: Single pole change over switch.
Operating Voltage: 10-14 VDC.
Current Consumption: 10mA Quiescent, 55mA Operated
Contact Rating: 1 amps @ 30v DC
External Dimensions: 85mm x 85mm x 85mm
Integral LED to visually indicate when unit has been activated.
Integral Buzzer to audibly indicate when unit has been activated.
Operations: > 1 million.
Stainless steel plate with “DOOR RELEASE” engraved.
Smoked black window.
Single pole change over switch.
For internal use only.
Materials: Stainless Steel Plate
Mount to standard UK Single Gang back box (not supplied).
For full specifications please click the link below:
Product CodeDRPR001

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.

eCommerce by CubeCart